Q1100
Cyclic Voltammetry Test System
The Cyclic Voltammetry is a basic experiment for the characterization of electrochemical systems. The long-cycle repeated measurement of Cyclic Voltammetry is widely used for quick evaluation of electrochemical materials for the application of devices such as rechargeable batteries, electrochemical double-layer capacitors and photo-electrochemical systems. Q1100 provides multi-channel management capability for efficient measurements of multiple sample devices.
Multi-Channel Cylic Voltammetry
High-Speed Data Acquisition
Sequence Builder
Individual Channel Management
Gas Control & Light Source Options
System Specification
Classification
Content
Channel #
4CH (Independent Configuration)
Test Board #
1EA
Mode
Voltage Control, Current Measurement
Output Connection
2Probe, 3Probe, 4Probe
Voltage Control
Range
Capability
Resolution
Accuracy
Stability
Scan Rate
Frequency
Setting Parameter
-10V ~ +10V
10mA
16bit DAC
< 0.1% of full scale
<0.1%/h after 30 min. warming up
10mV/sec ~ 100V/sec
0.001 ~ 100Hz
Voltage Sweep Range, Volatge Step, Scan Rate, Cycle
Current Measurement
Configuration
Range
Resolution
Accuracy
Stability
Sampling Rate
Measurement Parameter
Zero Resistance Ammeter
4 Decades (10μA, 100μA, 1mA, 10mA)
16bit ADC
< 0.01% of full scale
<0.1%/h after 30 min. warming up
40ksps
Cycle, Time, Voltage, Current, Epc / Ipc / Epa / Ipa
Time
1sec ~ 65,000 hrs
Measured Data
Voltage, Current, Time
Operating Temperature
20℃ ~ 30℃
PC Interface
Serial / LAN
Dimension
450mm(W) x 300mm(D) x 150mm(H)
Weight
< 10 Kg
Line Voltage
220V 1Ø 50 ~ 60Hz, <3A
System Specification
System Configuration
Q1100 Cyclic Voltammetry Test System
Leaflet Download (2.81MB)
System Components
System Frame
Dark Box
Measurement Unit
Optional Gas Controller
Cell Kit
Manipulate Unit
Q730 Battery Parameter Test Software